Face mills are tools with a large diameter that are used to cut a wide shallow path for facing operations. with PVD coating is resistant to deformation, good wear resistance and collapse resistance, low co-efficient of friction. SNMX insert with double-sided negative rake 8-sided shape is highly cost-effective. Double front angle design makes good sharpness and a certain strength.
Length
Size(mm)
IC
S
BS
r
13
13
5.5
1
0.8
1.What is a machining insert? Inserts are removable cutting tips, which means they are not brazed or welded to the tool body. They are usually index-able, meaning that they can be exchanged, and often also rotated or flipped, without disturbing the overall geometry of the tool (effective diameter, tool length offset, etc.). 2.What is negative and positive insert? A negative insert has an angle of 90° (0° clearance angle), while a positive insert has an angle of less than 90° (for example, 7° clearance angle). The illustration of the negative style insert, shows how the insert is assembled and tilted in the holder. 3.how can we guarantee quality? Always a pre-production sample before mass production; Always final Inspection before shipment. 4.What is the delivery time of your products? It depends on the inventory availability. If the items are in stock, the processing time would be within 24 hours; but if not, the Processing time would be around 20-30 working days. Hot Tags: metal cutting inserts, China, suppliers, factory, buy, price, cheap, quotation, free sample
Type
Ap
(mm)
Fn
(mm/rev)
Grade
CVD
PVD
VK3020
VK3040
VK1025
VK1325
VK1525
VK1328
VR1010
VR1520
VR1525
VR1028
VR1330
SNMX1205ANN-GM
1.00-6.00
0.15-
0.50
•
•
O
O
•
O
O
SNMX1606ANN-GM
1.00-6.00
0.15-
0.50
•
•
O
O
•
O
O
• : Recommended Grade O: Optional GradeFacing is used for machining a large flat area, typically the top of the part in preparation for other milling operations. SNMX insert with its own wiper edge has a high surface finishing with multiple type of chip breakers. It is suitable for general machining of steel and stainless steel.cast iron.super alloys.
Facing is used for machining a large flat area, typically the top of the part in preparation for other milling operations. SNMX insert with its own wiper edge has a high surface finishing with multiple type of chip breakers. It is suitable for general machining of steel and stainless steel.cast iron.super alloys.
